Titanium Ranger Eye - 1" Patch

These snazzy Grade 5 Titanium Ranger Eye patches measure 1" by 1", have rounded corners, beveled edges, and a stonewash finish.

Without adhesive loop backing, patches measure .1" high - the Radial pattern features tactile .025" milled grooves.

Each patch comes with two sets of hook and loop industrial adhesive stickers.

To attach - first pull apart the hook and loop adhesive set. The loop half is softer and fuzzy, while the hook half features many small structured spikes for grip. Remove the adhesive backing from the hook half, and press firmly to the non-beveled side of the Titanium patch for secure attachment.

Ranger Eye Weight - Plain

• Without Backing: .235 oz
• With Hook Backing: .250 oz

Ranger Eye Weight - Radial

• Without Backing: .214 oz
• With Hook Backing: .229 oz

We guarantee all Flytanium goods to be free of manufacturing defects in material and workmanship. If your product is defective, we will repair it, replace it, or substitute it for a different product of equal value.

Adhesives have a limited shelf life and/or service life. If your adhesive fails within 60 days of purchase, your item is covered under our warranty.

Care: Apply a gentle all purpose cleaner, (we recommend Simple Green), then remove excess with a microfiber cloth. For stubborn spots use a light amount of soapy water applied with a microfiber cloth and wipe dry. For anodized finishes, wipe down with an alcohol based glass cleaner to remove surface oils and enhance color.

Avoid: Avoid acetone and abrasives.